resort lobby test render

[azman_821009]

hi guys,

i have problem with light setting for interior resort lobby. this render took 30 minutes for hd 720p resolution (total frame 360). need some help with lighting setup & less render time.

thank you.

[Keraressi Abdelkarim]

i see u have 2 problem here not really problem . 2 things i mean .

1 . lighting
2 - surfaces .

but nice render keep going .


if u need realistic render u dont care about render time .

by the way really nice realsitic details (Y) . good luck .


about lighting interior and exterior very easy . i put scn lighting setup in kray scn depo .

there u go :
http://www.kraytracing.com/joomla/forum ... pic#p19197
GLuck.

[nico]

you need to work very hard....can test lightwave3d scene or try this
http://www.kraytracing.com/joomla/forum ... =viewtopic

[azman_821009]

thanks and really appreciate for the scenes brothers. i've seen both scenes and u are using area lights. the one I did was lumi panel. what is the different between the two lights anyway?

anyway here is the update perspective. I used a lumi panels at the lobby area. need some comments.

thanks

[3dream]

Seems to me that the hallway like areas should be much brighter. Probably not bright enough with lumi polys. Also a space like this with such volume might have some overhead lights, high pendant lights etc. Not sure if this is artistic or fully designed from arch drawings...

It all seems a bit dark to me. But from first image to second, your making great progress!

[nico]

azman_821009 the update it's > quality.
now you can work on surface.
floor need reflection + blurring
light power need + pover - so i think work in pwer 1.0 - test 1.5 or 2.0
active physical sky and playng with tonemap.
and read the tread as this:
http://www.kraytracing.com/joomla/forum ... =viewtopic

[azman_821009]

thanks for the comments guys. this perspectives took almost 3 hours ++ for render time with resolution 3730x1754.
It's normal for render time for the resoultion? And how can I reduce the render time for animation?

[Janusz Biela]

Please just post this scene (no details, only walls) Will try set up light for you.

[Keraressi Abdelkarim]

yes janusz u right

poste it man ^^

[azman_821009]

yes janusz u right

poste it man ^^

hi bro. i just sent a private message for the link to you. please check your inbox. thanks.

[Keraressi Abdelkarim]

yes janusz u right

poste it man ^^

hi bro. i just sent a private message for the link to you. please check your inbox. thanks.

thhnx man . now go see your PM i sent u scn with setup . cheers hope its usefull

[azman_821009]

yes janusz u right

poste it man ^^

hi bro. i just sent a private message for the link to you. please check your inbox. thanks.

thhnx man . now go see your PM i sent u scn with setup . cheers hope its usefull

thanks bro. yes i already open the files & reply to ur email again..please check..tq

[Janusz Biela]

Now I know why you have "flat feeling light" because of Gi resolution. It was really too big for this scene (over 2 meters) Also very bad setup with GI.
Here my 5-8 minutes renders + QMC + fast AE. I used only Physky light.

[azman_821009]

thanks for the comments Janusz. usually for the exterior i used GI about 2-3 meters & for the interior is about 250-500cm .. are u using just only Physky Light? no additional light? i'm still not familiar to play with tone map.

[Janusz Biela]

thanks for the comments Janusz. usually for the exterior i used GI about 2-3 meters & for the interior is about 250-500cm .. are u using just only Physky Light? no additional light? i'm still not familiar to play with tone map.

This resolution (2-3 m) you use for bird eye renders because detail are far to waste time for good GI, but in this case 500-600 mm is ok.
Use this tonemap: