www.kraytracing.com

Johny_quick wrote:

talats wrote:prerender 1,2,0.01;gradients_neighbour 0.1

What does it means? And what it does exactly?

better is:

prerender 1,2,0.05;gradients_neighbour 0.05



switch`s prerender:

1 - percent detection (1 is 100% , 0.5 is 50% of all samples) best is 1

2 - how many passes (1 is default , this no work, 2 is two passes - You recive extra samples), I thing 2 or 3 is maximum

0.05 - treshold of detection (smaller bigger dettection)


gradients_neighbour 0.05 - blurr engine for samples (0.1 small blurr but faster render, 0.01 stronger blurr but slower render)


Now when You recive new extra samles You can use smaller FG in Kray for example:
prerender 1,2,0.05;gradients_neighbour 0.05 You can use FG 200/600 min/max spacing 40/1000 , FG blurr 0 (or small 1-2)

Now render is very fast (becouse You have small FG) and You have good GI shadows silimar to QMC.
Of coarse You need experiment with this. You can use 10 passes:
prerender 1,10,0.05;gradients_neighbour 0.05 and after that very small FG: 10/50
And ultra fast AA and blurr becouse AA depeds from FG (small FG - fast AA, blurr etc...)